Ligand-mediate exciton allocation enables efficient cluster-based white light-emitting diodes via single and heavy doping

Published in Materials
Like

Share this post

Choose a social network to share with, or copy the shortened URL to share elsewhere

This is a representation of how your post may appear on social media. The actual post will vary between social networks

White light-emitting diodes are important for the development of high-resolution displays and lighting. However, complicated multi-emissive layers (EML) structures undoubtedly increase cost, and limit production yield. In recent years, single-EML white light-emitting devices have been developed rapidly, the composition of the EML are mainly divided into: (i) single-molecular white emitters: which is easy to prepare the device, but the molecular structure design difficult; (ii) multi-doping white emitter systems: the structure of molecular are more flexible and diversified, but the excited states of the hosts and the emitters are similar, as a result, the performance of the device is highly sensitive to the concentration of host-emitter doping, and excessive doping of long-wavelength emitter will reduce the color purity and efficiency of the white light-emitting device, which markedly decreased fabrication repeatability and performance stability.

However, copper clusters exhibit completely different excited state properties due to their unique structure, and the energy transfer and exciton allocation processes between the host and emitter are completely different. By optimizing the excited states of copper clusters, the energy transfer and exciton allocation between host and emitter can be precisely regulated. In this sense, copper clusters can be competent for yellow/orange emitters in both single doped and heavily doped white light-emitting systems.

Moreover, on the basis of ligand engineering, we have developed a series of blue-green EL Cu4I4 cubes clusters with the most advanced external quantum efficiency (EQE, ηEQE) of over 20% (Nat. Commun., 2023, 14: 2901). However, although single-molecule luminescent Cu4I4 clusters have also been confirmed, no white cluster light-emitting devices have been reported so far because the maximum ηEQE of yellow Cu4I4 cubes is still less than 10%.

Figure 1. Structures and Photophysical properties of the Cu4I4 clusters. a Chemical structures of [Dppy]2Cu4I4 and [tBCzDppy]2Cu4I4 and the design of ligand functionalization with antenna effect in carrier and energy transfer. CT and ET refer to charge and energy transfer, respectively. b Single-crystal X-ray diffraction results of [Dppy]2Cu4I4 and [tBCzDppy]2Cu4I4. The bond angles of Cu4I4 in coordination skeletons are highlighted from top and front views. c Proposed mechanisms of facilitated charge (above) and energy transfer (below) between CzAcSF and [tBCzDppy]2Cu4I4 mediated by tBCz-contributed energy levels, in comparison to [Dppy]2Cu4I4. Data out and in parenthesis are experimental and simulated values, respectively. d Doping concentration dependence of key transition parameters for CzAcSF:x% [tBCzDppy]2Cu4I4 films.

 

In that sense, in this contribution, based on 2-(diphenylphosphanyl)pyridine (Dppy), we introduced the di-(tert-butyl)-carbazole (tBCz) group with electron donor effect, obtained the tBCzDppy ligand with the donor-acceptor structure, and then coordinated with CuI, successfully constructed the copper cluster [tBCzDPPy]2Cu4I4 (Figure1a and b). Compared with the parent [Dppy]2Cu4I4, [tBCzDPPy]2Cu4I4 has more suitable highest occupied molecular orbitals (HOMO) and lowest unoccupied molecular orbitals (LUMO) energy levels than CzAcSF, which can directly form excitons by capturing holes and electrons simultaneously. On the other hand, the first singlet (S1) and triplet (T1) energy levels of the clusters are about 2.2 eV. In comparison to those of CzAcSF (2.9 eV), the large energy gaps reaching ~0.7 eV prevents host-to-cluster energy transfer. However, tBCz-centralized high-lying S9/S10 and T9/T10 states are intraligand charge transfer (ILCT) predominant, which are similar to intramolecular CT excited states of CzAcSF. Moreover, the S9/S10 and T9/T10 energy levels of ~2.6 eV are just located in the middle of the S1 and T1 energy levels of CzAcSF and [tBCzDPPy]2Cu4I4, therefore they can serve as the intermediate energy levels to facilitate exciton allocation to the cluster through a ladder-like process: energy transfer from S1/T1 of CzAcSF to S9/T9 (or S10/T10) of [tBCzDPPy]2Cu4I4, then to S1/T1 of [tBCzDPPy]2Cu4I4 by internal conversion (Figure 1c). Therefore, the introduction of tBCz group can optimize the charge and energy transfer from the host to the cluster, so that the photoluminescence (PL) quantum yield (PLQY, ϕPL) of the doped film can reach more than 80% (Figure 1d), and the prepared white light-emitting device can achieve a maximum EQE of 22.3% when the cluster doping concentration is as high as 30%, which are the record values of white cluster light-emitting devices (CLED) reported so far, and also among the best results for all-color CLEDs (Figure 4).

 

 

 

Figure 4. Electroluminescence (EL) performance of spin-coated CzAcSF:x% cluster based devices. a Device configuration of the cluster light-emitting diodes (CLED), and chemical structure of CzAcSF serving as blue TADF host. b Commission Internationale de lEclairage (CIE) coordinates of the devices on CIE 1931 chromatic panel and corresponding EL spectra of CLEDs (insets). Different to x = 30 for [DPPy]2Cu4I4, arrow indicates the variation of CIE coordinates at x = 10-40 for [tBCzDPPy]2Cu4I4. The CIE coordinates of spin-coated device based on neat CzAcSF are included for comparison. c Current density-voltage-luminescence curves and d efficiencies vs. luminance relationships of CzAcSF:30% cluster based devices. The data of neat CzAcSF based control device are also presented for comparison. e Summary of external quantum efficiencies (EQE) and optimal doping concentrations (x%) for representative singly doped white light-emitting devices. Solid and hollow symbols indicate the device fabrication through spin coating and vacuum evaporation, respectively. For detailed comparison on EL performance, please see Table S5.

 

These results not only demonstrate the advantages of cluster luminescent in practical white-emitting applications, but also show that the excited state properties of cluster molecules and exciton processes in organic-cluster hybrid systems can be flexibly manipulated by ligand engineering.

Please sign in or register for FREE

If you are a registered user on Research Communities by Springer Nature, please sign in

Follow the Topic

Materials Chemistry
Physical Sciences > Chemistry > Materials Chemistry

Related Collections

With collections, you can get published faster and increase your visibility.

Cancer and aging

This cross-journal Collection invites original research that explicitly explores the role of aging in cancer and vice versa, from the bench to the bedside.

Publishing Model: Hybrid

Deadline: Jul 31, 2024

Applied Sciences

This collection highlights research and commentary in applied science. The range of topics is large, spanning all scientific disciplines, with the unifying factor being the goal to turn scientific knowledge into positive benefits for society.

Publishing Model: Open Access

Deadline: Ongoing