Behind the Paper, From the Editors

Polymorphic Transformation and Dislocation Regulation in MoS2 Enabled by Electric Field Postprocessing for Enhanced Electromagnetic Wave Absorption

As wireless communication, electronic devices, and aerospace technologies continue to expand, electromagnetic interference has become an increasingly important challenge. Developing materials that can efficiently absorb electromagnetic waves across a broad frequency range requires precise control over electrical conductivity, polarization, and impedance matching. However, conventional modification strategies often involve complex synthesis procedures and offer limited control over the intrinsic electronic structure of absorbing materials. Researchers from Northwestern Polytechnical University have introduced a direct-current (DC) electric-field postprocessing strategy to regulate the phase composition and defect structure of molybdenum disulfide (MoS2), achieving substantially enhanced electromagnetic wave absorption through coordinated control of multiple energy-loss mechanisms.

Why This Electromagnetic Absorber Matters

MoS2 is a promising two-dimensional material for electromagnetic wave absorption because of its tunable electronic structure and abundant interfacial characteristics. Nevertheless, its semiconducting 2H phase has relatively limited electrical conductivity, whereas the metallic 1T phase, despite offering stronger conductive loss, can cause excessive electromagnetic reflection and impedance mismatch. Balancing these competing properties is therefore essential. Existing approaches, such as ion doping and heterojunction construction, may require complicated synthesis processes and cannot always provide precise control over phase composition and defect distribution. A controllable postprocessing strategy offers a potential alternative.

Innovative Design and Mechanism

The researchers developed a DC electric-field treatment to induce electron migration in the Mo d orbitals, driving the transformation of MoS2 from the semiconducting 2H phase toward the metallic 1T phase. This process simultaneously generates 2H/1T interfaces, sulfur vacancies, and lattice dislocations. The increased 1T-phase content establishes conductive pathways that enhance conductive loss, while charge accumulation at 2H/1T interfaces promotes interfacial polarization. More importantly, dislocations generate ordered arrays of equivalent dipoles through the separation of positive and negative charges along dislocation lines. Working together with sulfur-vacancy-induced dipoles, these structures substantially strengthen polarization loss. This combination enables the material to dissipate electromagnetic energy through multiple complementary mechanisms.

Outstanding Performance

Under the optimized treatment condition of 6 V for 10 min, the 1T-phase content reaches 67.63%, nearly doubling its proportion in the untreated material. The resulting MoS2 achieves a minimum reflection loss of −45.77 dB and an effective absorption bandwidth of 6.72 GHz at a thickness of 2.20 mm. This represents a 440% improvement in effective absorption bandwidth compared with pristine MoS2. The material also demonstrates favorable impedance matching across the 8–18 GHz range and a radar cross-section value of −14.61 dB m2 at normal incidence. Furthermore, electromagnetic absorption patches prepared using the optimized material reduce the electric-field radiation measured near mobile-phone motherboard components from approximately 900 to 40 V m-1.

Applications and Future Outlook

This work establishes electric-field postprocessing as a controllable approach for tailoring the electronic structure, phase composition, and defect chemistry of MoSâ‚‚ without relying on complicated chemical modification. By coordinating conductive, interfacial, and dipole polarization losses, the strategy provides new insights into the design of broadband electromagnetic wave absorbers. Its demonstrated performance in electromagnetic absorption patches also highlights potential applications in electronic-device electromagnetic interference protection, communication systems, and advanced electromagnetic functional materials. More broadly, the findings offer a promising foundation for developing externally tunable and intelligent electromagnetic wave-absorbing materials.